H.O. Sports H.O. Sports Universal Nylon Vest - Black from Wholesale Marine

3 Position, push to choke, polypropylene, magneto style ignition switch with 6 screw type terminals.

3 Position, push to choke, polypropylene, magneto style ignition switch with 6 wire type terminals.

Three (3) position, poly, ignition switch with 3 screw type terminals.

Replace lanyard if worn, cut or frayed. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application.

Four position poly ignition switch with 4 terminals. 3/16" screw diameter, 1-1/8" max panel, long shaft.

Three position (off-ignition-start) ignition switch. Three (3) screw type terminals.

…requirements of existing laws covering mandatory use of emergency stop switches. Extra strong cloth covered self-retracting lanyard. Black matte finish for attractive appearance. Mounts in a 1 1/2" diameter hole. Overall dimensions of switch housing are 2 3/4" x 2" and requires 1 1/2" behind panel.

Three position (off-ignition-start) magneto style ignition switch. Five (5) Screw type terminals. Max Panel Thickness: 1-1/8"

…due to overload, with auto re-start feature. Diaphragm design allows dry running. Pressure switch cut-in 22 psi (1.5 bar), cut-out 35 psi (2.4 bar). Complies with USCG 183.410 and ISO 8846 MARINE (Ignition Protection).

…/60Hz Output Voltage: 12V AC: Studs DC: Studs Dimensions: 5.50x 7.75 x 2.42 Weight: 5.6 Lbs. Product Features Ignition Protected Reverse Polarity Protected Short Circuit Protected 3-Stage Switching Electronic Circuit Maintenance Mode protects batteries during storage Fully Potted to Waterproof Electronics…

Battery disconnect switch for 12, 24 and 36 volt systems. Capacity 250 Amps continuous, 360 Amp intermittent.

Extra strong cloth covered self-retracting lanyard for KS-1 Ignition Kill Switch.

For recommended replacement of any lanyard if it is worn, cut or frayed. Dual circuitry allows kill switch to be wired for either ignition kill or magneto kill depending on the application. Universal.

Solenoid Switch used on Mercruiser, Mercury, and Mariner Marine engines. Replaces OE 89-818999A-2, 89-825842A-1, 89-850188T-1.

…parts, including flushing pump, macerator pump, switch, adaptors, clamps, hose and fastenings. May be installed 3ft(1m) below the waterline. All Corrosion Resistant Materials for Marine Use Complies with USCG 183.410 and ISO 8846 MARINE for Ignition Protection

…Tracks Bottom Up to 70 MPH Includes White and Black Color Face Plates and Bezels Easy to Install into Existing 2 1/8 inch gauge opening Wires to Ignition Switch for Auto Power On Rubber Buttons for Greater Reliability Backlight for Use at Night Shallow and Deep Depth Alarms Tranducer Can Be Transom Mounted…