H.O. Sports H.O. Sports Universal Nylon Vest - Black from Wholesale Marine

…biocide for maximum protection against agressive fouling and slime. Excellent for fiberglass, aluminum, wood and steel boats. Great for trailer boats. Pettit part numbers 1161 White, 1261 Blue, 1361 Green, 1461 Yellow, 1661 Red, 1861 Black. ***WILL SHIP UPS GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***

…formulated with a 40% cuprous oxide and is tough enough to withstand frequent trailering, launching and beaching. Used by Sea-Ray on all new boats. Pettit part numbers include 1240 Blue and 1840 Black. ***WILL SHIP UPS GROUND ONLY TO THE CONTINENTAL 48 STATES ONLY***

An etch for all types of metal. Quart ***WILL SHIP UPS GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***

…reduces soft growth and slime. The copper with Irgarol creates a dual biocide antifouling which has proven to outperform all other hard antifoulings. Pettit part numbers 1277 Blue, 1877 Black, 1377 Green, 1677 Red.***WILL SHIP UPS GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***

…retention. The result is a finish that is easy to apply by brush, roller or spray producing a lasting gelcoat-like brilliance with minimum effort. Pettit part numbers 3229 Bikini Blue, 3801 Black, 3213 Blue Ice, 3624 Bright Red, 3510 Brightwork Brown, 3626 Burgundy, 3237 Electric Blue, 3175 Gloss White…

Originally developed for wooden boats, they may also be applied to properly prepared fiberglass, metal and over existing enamels. Well known for their exceptionally easy, forgiving application, superb covering properties, good gloss, seasonal durability, and economical value. Size:Quart ***WILL…

…Antifouling Paint Dual Biocide, Multi-Season Protection No yearly build-up of paint Re-launch without re-painting Similar performance to Micron Extra Pettit part numbers 1297 Blue, 1897 Black.

…corrosion resistance to fresh and salt water is required. Coating is resistant to water, as well as, many chemical fumes and very humid environments. Pettit Protect High Build Epoxy 4700/4701 is usually used over the Aluma Protect for bare aluminum, pontoon hulls, and outdrives.

…as a base coat under Easypoxy when the surface is aged, cracked, checked, pitted, or anything less than smooth. Dries quickly and is easy to sand. Pettit part number 6649. ***WILL SHIP UPS GROUND ONLY TO THE CONTINENTAL 48 STATES ONLY***

…It can happen even if you take extreme care in maintaining your boat. Pettit Protect prevents water absorption, the cause of gelcoat blistering. If you already have blisters, nothing will fix them quicker or better than Pettit Protect

Anti-corrosive primer for steel and cast iron. ***WILL SHIP UPS GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***

Pettit 120 Brushing Thinner is a general purpose thinner for thinning brushing enamels for easier application. Many paints when stored for some time before use will increase in viscosity and should be thinned with a good thinner for normal brush application. Size - Quart. Can Be Shipped UPS Ground Only…

Skidless Compound is a dry powder which may be added to any of our topside paints to produce a rough textured finish.Size:Pint ***WILL SHIP UPS GROUND ONLY TO THE CONTIGUOUS 48 STATES ONLY***

Alumaspray + is an aerosol antifouling copolymer paint for use on aluminum outdrives and outboard motors in fresh,salt or brackish water. Alumaspray + cleans itself by washing away at controlled rate when in contact with water. Available in Black and Grey.

Pettit 121 Spraying Thinner is a general purpose thinner for thinning spray enamels for easier application. Many paints when stored for some time before use will increase in viscosity and should be thinned with a good thinner for normal spray application. Size - Quart. Can Be Shipped UPS Ground Only…

185 Ablative Thinner is specifically formulated for thinning Pettit ablative antifouling paints. Add up to 10% when brushing or rolling on warm or windy days. Use up to 15% if spraying. Call 800-221-4466 for specific spray recommendations.