H.O. Sports H.O. Sports Universal Nylon Vest - Black from Wholesale Marine

Cover Plates are designed to quickly seal or conceal installation holes, instrument panel holes and other access holes where ready entry is not a requirement. Molded of high-impact, marine quality plastic, with ultraviolet inhibitors for prolonged service. Measuring 6.5" OD, Cover Plates conceal holes…

…pry-out deck plate as an access cover to its permanently mounted pump. These pry-out plates were designed with an extra heavy O-ring to assure a water tight fit. Plates are provided with non- skid or smooth surfaces for different installation requirements. The Diamond Pattern Deck Plate takes a proven…

Brite Plate Chrome Plated Fittings are the look of stainless with the price of plastic. The Brite Plate plating process actually strenghtens plastic parts and will resist sunlight, salt water, oil, gasoline and most common marine chemicals. Thermal cycling and CSA wet cycle testing confirm the strength…

…watertight seal. A patented back-up sealing wall leaves the plate watertight, even if the gasket is removed. Deck plates are used for access to shut-off valves or back-fastenings, inspectionk and clean out for tanks and compartments. A screw-out plate should be used in compartments where a change in air pressure…

…number plate is constructed of hard plastic. Bernard 3" pressure-sensitive letters and numbers can be applied before the plates are secured to the hull. These hard plastic plates are attached to hulls with screws to wood hulls and can easily be removed at refinishing time. The hard plastic plates are also…

Black plastic deck plate key for deck plate size 1-1/4" and 1-1/2". The keys for 1" thru 1-1/2" deck plates have a 1 inch spade on handle that allows them to fit many other "slot" type opening deck plates.

Cover Plates are designed to quickly seal or conceal installation holes, instrument panel holes and other access holes where ready entry is not a requirement. The 5" cover plate measures 6.5" OD, conceals holes up to 5" in diameter and mounts with only four screws. The 3.5" cover plate measures 4.5…

Waste Deck Plate for 1.5" hose. Chrome plated zinc alloy. black plastic cap. Deck plate key and o-ring included. Cap has a slot between the holes. Hose size 1.5". O.D. flange 3.25". Length of neck 2.5". Mounting hole diameter 2 1-8".

Water fill deck plate for a 1.5" hose. Chrome plated zinc alloy. Black plastic cap. Deck plate key and o-ring included. Hose size 1.5". O.D. flange 3.25". Length of neck 2.5".

Beckson developed the first pry-out deck plate. These plates were designed with an extra heavy O-ring to assure a water tight fit. This model of plates has a non-skid raised dimple center. Pry-out plataes should be installed in areas where internal pressure (oil-canning) is not present. Trim ring outside…

This registration number plate is constructed of pressure-sensitive vinyl-mylar. Bernard 3" pressure-sensitive letters and numbers can be applied before the plates are secured to the hull. These pressure-sensitive plates are for fiberglass or metal hulls. Lettering is sold separately. Measures 4" x 24…

Choice of either black plastic or metal license plate brackets to meet wide application needs. Mode of either economical high-impact, non-corrosive polypropylene or zinc plated metal for the most demanding applications. 1/4" Mounting holes on 2" centers.

Eight inch base diameter chrome plated brass ship's bell with solid cast brass construction with heavy-duty chrome plating. An 8" ship's bell is required by the U.S.C.G. on boats from 12 - 20 meters.

Twin shank chrome plated bow eye measures 2-3/8" x 5" with an inside eye diameter of 1-1/8".

The PlugMateTM garboard wrench will fit most standard and "T" style garboard plugs. In addition, the PlugMateTM has various deck plate keys and a shackle key. Includes replacement plug #520041 and a raised label.

Shakespeare offers an extensive line of marine grade connectors and adapters for antenna installations. Barrel connector for PL-259-ended cables Gold-plated brass to better withstand the elements and to minimize traditional connector-borne signal loss.